Everomime™ Flex
Everolimus-eluting coronary stent system

Everomime™ Flex

Drug-Eluting Stents · Everolimus-eluting stents

Everomime™ Flex

Everomime Flex is the flexibility-focused member of Kepler’s Everomime everolimus-eluting stent family. It pairs the ultra-thin 50 µm cobalt-chromium scaffold with a highly flexible monolithic delivery system for tortuous and distal coronary anatomy.

S-links and Y-connectors between the hybrid cells let the stent bend with the vessel, and a 7 mm elongated distal tip with a 0.016" entry profile eases lesion entry. Everolimus is carried on a biodegradable PLLA + PLGA polymer that is only 2 µm thick.

Key features.

Product highlights.

  • Stent design: Hybrid cell design
  • Stent material: Cobalt chromium L605
  • Strut thickness: 50 µm
  • Stent diameters: 2.00, 2.25, 2.50, 2.75, 3.00, 3.50, 4.00, 4.50 mm
  • Stent lengths: 8, 13, 16, 19, 24, 29, 32, 37, 40, 44, 48 mm
  • Mean recoil / length change: < 4 % / < 1.0 %
  • Drug: Everolimus

Design & technology.

How Everomime™ Flex is built and what each part of the system does.

Product design & architecture

Flexibility comes from the way the rings are joined. Non-linear S-links and Y-connectors act as hinges between the hybrid cells, so the stent bends along its length while the strut-width variability keeps radial support.

  • Hybrid cell design (open + closed cells)
  • Y-connector and S-link interconnections
  • Strut-width variability along each ring
  • Mean recoil < 4 % and length change < 1.0 %

Stent technology

Cobalt-chromium L605 allows a thin strut while retaining radiopacity and radial strength. At 50 µm, Everomime’s struts are 15 µm thinner than the 65 µm sirolimus platforms in the range.

  • Material: cobalt chromium L605
  • Strut thickness: 50 µm
  • Diameters 2.00–4.50 mm; lengths 8–48 mm

Drug & polymer technology

Everolimus, a limus-family antiproliferative, is released from a biodegradable PLLA + PLGA polymer. The coating is 2 µm thick.

  • Drug: everolimus
  • Dose: 1.25 µg/mm² of stent surface
  • Polymer: PLLA + PLGA, biodegradable and biocompatible
  • Coating thickness: 2 µm

Delivery system

The monolithic rapid-exchange catheter combines a reinforced hypotube with a highly flexible distal shaft. It transmits push efficiently and resists kinking in difficult anatomy.

  • Rapid exchange, 142 cm usable length
  • Nominal 8 atm; rated burst 14/16 atm depending on stent size and length
  • Balloon overhang ≤ 0.5 mm; two Pt/Ir markers
  • 5 F guide compatible; 0.014" guidewire
Delivery-system and tip architecture
Delivery-system and tip architecture

Intended applications.

  • Selected coronary stent procedures
  • Anatomy-specific stent and delivery-system selection

Device-use information.

Everomime Flex is intended for improving coronary luminal diameter in patients with symptomatic ischaemic heart disease due to de novo and restenotic lesions in native coronary arteries.

Read the instructions for use supplied with the device for contraindications, warnings, precautions and handling instructions.

Request instructions for use
Healthcare and medical technology editorial visual

Product details.

Product brochure

Everomime Flex e-catalogue

Download the Everomime™ Flex e-catalogue for the product description, key features, design and technology, technical specifications and the full ordering information with ordering codes.

The PDF preview loads when this tab opens. If your browser cannot display PDFs inline, use Open in new tab or Download PDF.

Technical information & ordering.

Product and ordering summary
InformationEveromime™ Flex
ProductEveromime™ Flex
Device typeEverolimus-eluting coronary stent system
CategoryDrug-Eluting Stents — Everolimus-eluting stents
Available configurations87 — see the Size Chart tab for ordering codes
Technical specificationsSee the Specification tab
E-catalogueAvailable in the View Brochure tab
SupplyPre-mounted on its rapid-exchange delivery system, sterile and for single use

To order, quote the product name and the ordering code from the Size Chart.

Product FAQ.

What is Everomime™ Flex used for?

Everomime Flex is intended for improving coronary luminal diameter in patients with symptomatic ischaemic heart disease due to de novo and restenotic lesions in native coronary arteries.

Which sizes does Everomime™ Flex come in?

Everomime™ Flex is available in 87 configurations (stent diameters: 2.00, 2.25, 2.50, 2.75, 3.00, 3.50, 4.00, 4.50 mm; stent lengths: 8, 13, 16, 19, 24, 29, 32, 37, 40, 44, 48 mm; mean recoil / length change: < 4 % / < 1.0 %). The Size Chart tab lists every size with its ordering code.

What is Everomime™ Flex made of?

Cobalt chromium L605. The Specification tab gives the full list of materials and dimensions.

How is Everomime™ Flex supplied?

Everomime™ Flex is supplied pre-mounted on its rapid-exchange delivery system, sterile and for single use. Read the instructions for use packed with the device before use.

How do I order Everomime™ Flex?

Send an enquiry from this page with the product name and the ordering code from the Size Chart. The Kepler team will respond with availability and pricing.

Connect with Kepler about Everomime™ Flex.

Connect with Kepler for product, documentation and business enquiries.

Stay connected. Stay informed.

Request product and company updates from Kepler.

Expanded product visual